![]() ![]() You can make any length of LED strip with this connector. While you're realigning the LED light strips. Addressable LED and Drivers 4 Pin LED Connector Extension Cable Cord for SMD 5050 3528 RGB LED Light Strip 50 CM. ![]() If you can see that they aren't aligned right, gently move the strip back and forth until the strips light up properly, this usually fixes connection issues! STEP 4. With the connector box open, we need to check and make sure that LED strip's oval or circular copper pads are properly lined up with the connector's silver pins. In case you need to adjust the light strips and metal pads with your bare hands, there's no need to worry because our LEDs run on 12 volts DC, and there is no shock danger there! ![]() Aqua / Blue-green color: Red circuit/copper pad not making good connection with metal pin in connector Yellowish color: Blue circuit/copper pad not making good connection with metal pin in connector The Diode LED 12 inches Tape to Tape connector with 12 inches Jumper, attaches two sections of STREAMLITE Tape light together. Purple/ Pink color: Green circuit/copper pad not making good connection with metal pin in connector No color: +12V circuit/copper pad not making good connection with metal pin in connector Pop open the connector boxes to see the LED strip's connections. Below is a list of a few situations regarding the LEDs color (or lack thereof) and what may be happening here: If the LED strips aren't both coming up white when you set them to white. If your first strip lights up white, but your second strip doesn't light up at all, or displays a color other than white, then we've got a bit of an issue and we'll need to look a little closer at these connections, which can be finicky to work with sometimes. To make the rest of these steps as easy as possible, set your strips to white once you've turned them on. With the polarities right, we can turn the lights on. ![]()
0 Comments
Leave a Reply. |